Timo Platt M.Sc.

• Funktionalisierung von Werk­zeug­topo­grafien zur Material­fluss­steuerung und Stand­zeit­optimierung (Abgeschlossen)

• Grundlagenuntersuchung zu prozessstabilisierenden Dämpfungseffekten beim Fräsen durch den Einsatz funktionell strukturierter Umfangsschneiden

• Biologisierte Spanntechnik (BioSpann)

Wöste, F.; Platt, T.; Baumann, J.; Biermann, D.; Wiederkehr, P.
Towards a differentiated understanding of process damping and the introduction of process stiffening effects
International Journal of Machine Tools and Manufacture, 204 (2025) 104233, https://doi.org/10.1016/j.ijmachtools.2024.104233

Stammkötter, S.; Tenkamp, J.; Teschke, M.; Donnerbauer, K.; Koch, A.; Platt, T.; Biermann, D.; Walther, F.:
Fatigue and short crack assessment of powder bed fusion laser-based fabricated AlSi10Mg miniature specimens under alternating bending load
Materials & Design (2024), https://doi.org/10.1016/j.matdes.2024.113412

Platt, T.; Meijer, A.; Biermann, D.:
Experimental Investigation on the Surface Integrity in Micromilling AISI H11 Tool Steel
7th CIRP Conference on Surface Integrity, Procedia CIRP 123 (2024), S. 65-70. DOI: https://doi.org/10.1016/j.procir.2024.05.014

Kipp, M.; Peters, J.; Platt, T.; Biermann, D.:
Abrasive finishing of surface structures with diamond-coated foams.
CIRP Annals - Manufacturing Technology, 73 (2024) 1, S. 261-261, doi: https://doi.org/10.1016/j.cirp.2024.04.033

Tillmann, W.; Meijer, A.; Platt, T.; Biermann, D.; Stangier, D.;, Dias, N.
Cutting performance of TiAlN-based thin films in micromilling high-speed steel AISI M3:2
Manufacturing Letters Online 23.01.2024 https://doi.org/10.1016/j.mfglet.2024.01.005

Alexander Leonard Meijer, Timo Platt, Torben Merhofe, Dirk Biermann
Process Design for Micromilling of Stochastically Distributed Bionic Surface Structures
MM Science Journal 13.12.2023 pp. 7018 - 7026 DOI: http://doi.org/10.17973/MMSJ.2023_12_2023095

Wöste, F.; Platt, T.; Baumann, J.; Biermann, D.; Wiederkehr, P.
Fundamental investigation on process damping potentials of cutting tools with flank face chamfers
CIRP Journal of Manufacturing Science and Technology 47 (2023), S. 7-17, ISSN 1755-5817, https://doi.org/10.1016/j.cirpj.2023.08.012

Wali, A., Meijer, A., Platt, T.,  Bierman,D.
Experimental Investigations to Machine Micro Cutting Tools using Precise Electrochemical Machining (PECM).
Proceedings of the 18th International symposium on electrochemical machining technology (INSECT 2022), S. 85-90

Wali, A., Platt, T., Meijer, A., Bierman,D.
Micro structuring tool steel components using Precise Electrochemical Machining (PECM)
Prod. Eng. Res. Devel. (2022). https://doi.org/10.1007/s11740-022-01167-2

Platt, T., Baumann, J., Biermann, D.
Potential of high-feed milling structured dies for material flow control in hot forming
Prod. Eng. Res. Devel. (2022). https://doi.org/10.1007/s11740-022-01165-4

Tillmann, W.; Stangier, D.; Meijer, A.; Krebs, E.; Ott, A.; Platt, T.; Lopes Dias, N. F.; Hagen, L.; Biermann, D.
Adapting the Surface Integrity of High-Speed Steel Tools for Sheet-Bulk Metal Forming
Journal of Manufacturing and Materials Processing (JMMP), 6 (2022) 2, doi: 10.3390/jmmp6020037 

Meijer, A. L.; Merhofe, T.; Platt, T.; Biermann, D.:
Algorithmen-basierte Freiformflächenstrukturierung
Erzeugung von NC-Programmen für die mikrofrästechnische Strukturierung von Freiformflächen
wt Werkstattstechnik online, 111 (2021) 11-12, S. 797–802, doi: 10.37544/1436–4980–2021–11–12–27

Wild, T.; Platt, T.; Biermann, D.; Merklein, M.
Analysis of the Influence of Surface Modifications on the Fatigue Behavior of Hot Work Tool Steel Components
Materials 14 (2021) 23, 7324, doi: 10.3390/ma14237324

Platt, T.; Meijer, A.; Merhofe T.; Biermann, D.
Simulation-Based and Experimental Investigation of Micro End Mills with Wiper Geometry
Micromachines. 12 (2021) 5:496, doi: 10.3390/mi12050496

Platt, T.; Biermann, D.
Functionalization of Tool Topographies for Material Flow Control and Tool Life Optimization in Hot Sheet-Bulk Metal Forming - A Concept Study
In: Sheet Bulk Metal Forming - TCRC73, 2020, Lecture Notes in Production Engineering, Springer, (2021), S. 553-567, doi: 10.1007/978-3-030-61902-2_25

Platt, T.; Meijer, A.; Biermann, D.
Conduction-Based Thermally Assisted Micromilling Process for Cutting Difficult-to-Machine Materials
Journal of Manufacturing and Material Processing, 4 (2020) 2, S. 34, doi: 10.3390/jmmp4020034