• Functionalisation of Tool Topographies for Material Flow Control and Tool Life Optimisation (CRC/TCRC 73 SP T07) (finished)

• Fundamental investigations on stabilizing damping effects in milling processes by using functionally structured peripheral cutting edges

• Biologized Clamping Technology (BioClamp)

Wöste, F.; Platt, T.; Baumann, J.; Biermann, D.; Wiederkehr, P.
Towards a differentiated understanding of process damping and the introduction of process stiffening effects
International Journal of Machine Tools and Manufacture, 204 (2025) 104233, https://doi.org/10.1016/j.ijmachtools.2024.104233

Stammkötter, S.; Tenkamp, J.; Teschke, M.; Donnerbauer, K.; Koch, A.; Platt, T.; Biermann, D.; Walther, F.:
Fatigue and short crack assessment of powder bed fusion laser-based fabricated AlSi10Mg miniature specimens under alternating bending load
Materials & Design (2024), https://doi.org/10.1016/j.matdes.2024.113412

Platt, T.; Meijer, A.; Biermann, D.:
Experimental Investigation on the Surface Integrity in Micromilling AISI H11 Tool Steel
 7th CIRP Conference on Surface Integrity, Procedia CIRP 123 (2024), S. 65-70. DOI: https://doi.org/10.1016/j.procir.2024.05.014

Kipp, M.; Peters, J.; Platt, T.; Biermann, D.:
Abrasive finishing of surface structures with diamond-coated foams.
CIRP Annals - Manufacturing Technology, 73 (2024) 1, S. 261-261, doi: https://doi.org/10.1016/j.cirp.2024.04.033

Tillmann, W.; Meijer, A.; Platt, T.; Biermann, D.; Stangier, D.;, Dias, N.
Cutting performance of TiAlN-based thin films in micromilling high-speed steel AISI M3:2
Manufacturing Letters Online 23.01.2024 https://doi.org/10.1016/j.mfglet.2024.01.005

Alexander Leonard Meijer, Timo Platt, Torben Merhofe, Dirk Biermann
Process Design for Micromilling of Stochastically Distributed Bionic Surface Structures
MM Science Journal 13.12.2023 pp. 7018 - 7026 DOI: http://doi.org/10.17973/MMSJ.2023_12_2023095

Wöste, F.; Platt, T.; Baumann, J.; Biermann, D.; Wiederkehr, P.
Fundamental investigation on process damping potentials of cutting tools with flank face chamfers
CIRP Journal of Manufacturing Science and Technology 47 (2023), S. 7-17, ISSN 1755-5817, https://doi.org/10.1016/j.cirpj.2023.08.012

Platt, T., Baumann, J., Biermann, D.
Potential of high-feed milling structured dies for material flow control in hot forming
Prod. Eng. Res. Devel. (2022). https://doi.org/10.1007/s11740-022-01165-4

Tillmann, W.; Stangier, D.; Meijer, A.; Krebs, E.; Ott, A.; Platt, T.; Lopes Dias, N. F.; Hagen, L.; Biermann, D.
Adapting the Surface Integrity of High-Speed Steel Tools for Sheet-Bulk Metal Forming
Journal of Manufacturing and Materials Processing (JMMP), 6 (2022) 2, doi: 10.3390/jmmp6020037 

Meijer, A. L.; Merhofe, T.; Platt, T.; Biermann, D.:
Algorithmen-basierte Freiformflächenstrukturierung
Erzeugung von NC-Programmen für die mikrofrästechnische Strukturierung von Freiformflächen
wt Werkstattstechnik online, 111 (2021) 11-12, S. 797–802, doi: 10.37544/1436–4980–2021–11–12–27

Wild, T.; Platt, T.; Biermann, D.; Merklein, M.
Analysis of the Influence of Surface Modifications on the Fatigue Behavior of Hot Work Tool Steel Components
Materials 14 (2021) 23, 7324, doi: 10.3390/ma14237324

Platt, T.; Meijer, A.; Merhofe T.; Biermann, D.
Simulation-Based and Experimental Investigation of Micro End Mills with Wiper Geometry
Micromachines. 12 (2021) 5:496, doi: 10.3390/mi12050496

Platt, T.; Biermann, D.
Functionalization of Tool Topographies for Material Flow Control and Tool Life Optimization in Hot Sheet-Bulk Metal Forming - A Concept Study
In: Sheet Bulk Metal Forming - TCRC73, 2020, Lecture Notes in Production Engineering, Springer, (2021), S. 553-567, doi: 10.1007/978-3-030-61902-2_25

Platt, T.; Meijer, A.; Biermann, D.
Conduction-Based Thermally Assisted Micromilling Process for Cutting Difficult-to-Machine Materials
Journal of Manufacturing and Material Processing, 4 (2020) 2, S. 34, doi: 10.3390/jmmp4020034