• Development of a process chain accelerated manufacturing process for the production of die-cast mold inserts based on a simulation-based methodology and resource-efficient recycling approaches
• Basic Investigation into the Use of Cryogenically Generated Additive Support Structures and Damping Elements to Stabilize the Milling Process when Machining Thin-Walled Components
• Greybox-Modeling of the Initial Wear Behavior of Coated Tools in the Milling Process Based on Operando, In- and Ex-Situ Analyses (SPP2402)

Denkmann, N.; Jaquet, S.; Carballo, R. G.; Rümenapf, F.; Dias, N. L.; Tillmann, W.; Biermann, D.; Debus, J.:
Determining and predicting the flank wear width and residual stress of coated tools by raman imaging.
Wear (2025), doi: 10.1016/j.wear.2025.206397

Rümenapf, F.; Lopes Dias, N. F.; Stangier, D.; Denkmann, N.; Meijer, A.; Jaquet, S.; Garcia Carballo, R.; Debus, J.; Biermann, D.; Tillmann, W.
Influence of TiAl cathode material manufacturing route on the structural and tribo-mechanical properties of arc-evaporated TiAlN thin films
Surf. Coat. Technol. (2025), doi: https://doi.org/10.1016/j.surfcoat.2025.131815

Garcia Carballo, R.; Baumann, J.; Jaquet, S.; Biermann, D.:
Fundamental investigation of process stabilization through combined modification of milling tools with structured functional surfaces and asymmetric dynamic properties.
Production Engineering Research and Development, (2025), doi: doi.org/10.1007/s11740-024-01329-4

Jaquet, S.; Meijer, A.; Baumann, J.; Biermann, D.:
Fundamental investigation on the time-variance of process stability
Production Engineering Research and Development (2024), doi: https://doi.org/10.1007/s11740-024-01276-0

Vogel, F.; Baumann, J.; Jaquet, S.; Biermann, D.:
Particle Damped Tool Holders Enable Higher Stability Limits when Milling EN AW-7075
MIC Procedia (2023), S. 77-84, doi: https://dx.doi.org/10.2139/ssrn.4657844

Jaquet, S.; Baumann, J.; Garcia, R.; Biermann, D.:
Fundamental analysis on the dynamic behavior of tools with structured functional surfaces in cutting operations.
MM Science Journal, Special Issue on HSM2023, (2023) November, S. 6872-6880, doi: http://doi.org/10.17973/MMSJ.2023_11_2023105

Schmiedt; A., Jaquet, S.; Manka, M.; Tillmann, W.; Walther, F.;
Tensile and fatigue assessments of brazed stainless steel joints using digital image correlation
MATEC Web of Conferences. Vol. 165. EDP Sciences, 2018, doi: 10.1051/matecconf/201816506003

Denkmann, N.; Jaquet, S.; Carballo, R. G.; Rümenapf, F.; Dias, N. L.; Tillmann, W.; Biermann, D.; Debus, J.:
 Bestimmung und Vorhersage der Verschleißmarkenbreite und Eigenspannung beschichteter Zerspanungswerkzeuge via Raman-Imaging.
SPP2402-Konferenz, 30.9-1.10.2025, Aachen, Germany.
 
 Carballo, R. G.; Jaquet, S.; Baumann, J.;  Denkmann, N.; Rümenapf, F.; Dias, N. L.; Tillmann, W.; Debus, J.; Biermann, D.:
Investigation of the stationary and non-stationary process behaviour with regard to timevariant process stability and progressive flank wear.
19th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 16.-18.7.2025, Gulf of Naples, Italy.
 
Platt, T.; Figge, J.; Jaquet, S.; Baumann, J.; Biermann, D.:
Evaluation of a Vacuum Clamping System for Machining of Deformation-Sensitive Polymers
19th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 16.-18.7.2025, Gulf of Naples, Italy.
 
Platt, T.; Jaquet, S.; Baumann, J.; Jäckel, C.; Niggemeyer, F.; Steinhorst, M.; Roch, T.; Biermann, D.
Analysis of Surface-Modified Clamping Elements for Improved Clamping of Deformation-Sensitive Workpieces with a Sensor-Integrated Fixture
18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 10.-12.7.2024, Gulf of Naples, Italy.

Jaquet, S.; Platt, T.; Baumann, J.; Biermann, D.:
Evaluation of the Adhesion and Vibration Suppression Potential of Cryogenically Generated Support Structures in Milling Thin-Walled Components.
19th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 16.-18.7.2025, Gulf of Naples, Italy.

Jaquet, S.; Meijer, A.; Baumann, J.; Denkmann, N; Ontrup, F.; Dias, N.; Biermann, D.; Debus J.
Towards the evaluation of wear and time-variant process stability during milling supported by k-means cluster analyses of Raman scattering data.
18^th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 10.-12.7.2024, Gulf of Naples, Italy.

Jaquet, S.; Baumann, J.; Garcia, R.; Biermann, D.
Fundamental analysis on the dynamic behavior of tools with structured functional surfaces in cutting operations.
17^th International Conference on High Speed Machining - HSM 2023. 25.-28.10.2023, Nanjing, China, online.

Vogel, F.; Baumann, J.; Jaquet, S.; Biermann, D.:
Particle Damped Tool Holders Enable Higher Stability Limits when Milling EN AW-7075
Posterpräsentation, 24th Machining Innovations Conference for Aerospace Industry 2023 (MIC 2023), 29.-30.11.2023, Garbsen